connect pex press fittings
Jun 21, 2023

PEX press fittings are a quick and easy way to connect PEX piping without needing any special tools. They are designed to be used with PEX pipes and have a unique design that allows the tubing to be compressed onto a specially designed fitting. Here’s how to connect PEX press fittings and what to pay attention to.
Before connecting the PEX press fittings, it is essential to prepare the piping. Cut the PEX tubing to the required length, ensuring that the cut is clean and has no burrs. Use a pipe cutter or a sharp utility knife to cut the tubing, and then use a deburring tool or sandpaper to smooth the edges.
Once the tubing is prepared, slide the PEX press fitting onto the end of the tubing. Ensure that the fitting is fully inserted until it reaches the shoulder of the fitting. PEX press fittings have an O-ring inside that compresses onto the tubing to provide a watertight seal.
To connect the PEX press fitting and the PEX tubing, use a PEX press tool. The press tool compresses the fitting onto the tubing to make a tight connection. The press tool will come with a crimping head that is specific to the size of the fitting. Ensure that you select the correct crimping head before pressing.
After connecting the PEX press fittings, it is essential to check for leaks. Turn on the water supply and inspect the connections for any leaks. If you find any leaks, shut off the water supply and recheck the connections to ensure that the fittings are fully inserted into the tubing.






