Connect pex slide fittings

Jul 18, 2023

IMG4796

PEX slide fittings are a popular method for connecting PEX tubing. They are easy to install, require no special tools, and can be used on both hot and cold water systems. Here are some tips on how to connect PEX slide fittings and what to pay attention to.

Connection Method

1. Choose the Right Fitting

Before you begin, make sure you have the right fittings for the job. PEX slide fittings come in a variety of shapes and sizes, so you need to choose the fitting that is appropriate for your project. Make sure you check the specifications of each fitting to ensure compatibility with your PEX tubing.

2. Cut the PEX Tubing

Measure the length of PEX tubing you need and then cut it to size. Make sure that you use a proper PEX tubing cutter to ensure a clean, straight cut. It is essential to cut the tubing to the right length, as it should fit snugly into the fitting without any gaps.

3. Mark the Insertion Depth

Before inserting the PEX tubing into the slide fitting, it's important to mark the insertion depth. This will ensure that you push the tubing in far enough to make a secure connection. The insertion depth varies depending on the size of the PEX tubing and the slide fitting used, so check the manufacturer's instructions.

4. Slide the Fitting onto the PEX Tubing

Once you have measured and cut the PEX tubing to size, slide the fitting onto the tubing. Make sure that the tubing is inserted into the fitting as far as it can go, up to the insertion depth mark. Ensure you hold both the fitting and tubing using both hands, as it can be stiff to push the tubing into the fitting.

5. Secure the Fitting in Place

When the tubing is fully inserted into the fitting, it's time to secure the fitting in place. Using a crimp tool or a clamp tool, crimp the metal ring around the fitting. This compression ensures the teeth of the fittings grip onto the pipes preventing any leaks. If the ring is not crimped properly or too loose, there could be leaks or failure around the fitting.

6. Check the Connection

Lastly, inspect the connection to ensure it's secure and leak-free. Turn on the water supply and check for any water leakage around the connection. If there are leaks or problem areas, these can be corrected using PEX fittings or by re-crimping over the metal ring.

You Might Also Like