Kitchen water and electricity installation

The first is to determine how the water and electricity in the kitchen should be installed, and the overall number of sockets should be considered.

Since the kitchen is usually the place where water and electricity are used the most in the home, once the sockets are not reserved enough, it is easy to affect the normal quality of life.

In general, in addition to your own needs, you should also reserve 3-5 sockets for emergencies. If conditions permit, you can reserve a track socket, so that the decoration will look beautiful and practical. At the same time, in order to use electricity safely, be sure to pay attention to waterproofing. Therefore, during the decoration, it is necessary to install the socket waterproof box. This not only reduces the risk of electric shock, but also prevents oil fumes from contaminating the socket, reducing cleaning efforts.

Under normal circumstances, before we install water and electricity in the kitchen, we must design the location of water and electricity installation. On the one hand, it is necessary to pay attention to the reasonable distinction of hot and cold water pipes, and achieve the following three points: keep the height of the cold and hot water inlets the same; the cold and hot water inlets should be 2 cm higher than the wall; cold and hot water inlets The mouth is perpendicular to the wall, and the distance is guaranteed to be 15 cm. On the other hand, pay more attention to the treatment at the waterway joints, and use the buffer method to accumulate water to avoid the situation of insufficient water due to insufficient water pressure when everyone uses water.

At the same time, pay attention to the concealment of water pipes to avoid long-term exposure of water pipes, which will shorten the life of water pipes. In circuit design, we must consider the feasibility and safety of socket installation in detail. Think about the electrical appliances in the kitchen, the placement of electrical appliances, etc. in advance, and reserve a certain wire interface for us to use when adding appliances in the future.