PE Polyethylene
Aug 05, 2022
Polyethylene is usually divided into low density polyethylene (LDPE), medium density polyethylene (MDPE) and high density polyethylene (HDPE), and their applications are different. LDPE is usually used to produce lightweight products such as films and fibers, and when it comes to the production of injection-molded pipes, HDPE or MDPE are usually used.
PE pipes are usually black and are generally used to transport cold water.
In the manufacture of pipes, due to the poor heat resistance of polyethylene, it needs to be modified in some high-demanding occasions (such as heating systems), so there are PE-RT and PE-X.
PE-RT refers to heat-resistant polyethylene. It adopts the method of copolymerization of ethylene and octene to improve the heat resistance of PE by controlling the number and distribution of side chains to obtain a unique molecular structure.
PE-X refers to cross-linked polyethylene. Cross-linking makes the linear macromolecular structure of polyethylene into a three-dimensional network structure, thereby improving its heat resistance and creep resistance. Cross-linked polyethylene is not thermoplastic and cannot be hot-melt bonded. Currently commercialized PE-X includes PE-Xa, PE-Xb, PE-Xc. It is worth noting that a and b here do not refer to product grades A or B, but they are in the cross-linking reaction. The methods used are different.
PE-RT and PE-X are often used as floor heating pipes.





