What should I do if the ppr pipe leaks water?

What causes ppr pipes to leak?

1. Improper operation and setting of the PPR pipe fitting injection molding machine, such as improper adjustment of technical parameters such as injection pressure and mold clamping and pressure holding time, lead to incomplete injection molding and incomplete combination of the insert and the PPR resin. At the same time, the cooling shrinkage of the PPR raw material increases, resulting in the formation of gaps or voids at the joint of the insert and the PPR raw material. With the thermal expansion and contraction of the PPR raw material in the later use process, the places that are not tightly bonded begin to leak.

2. The design of the abrasive tool for PPR pipe fittings is unreasonable, and this problem is also easy to ignore, such as the distance between the injection molding feed port and so on.

3. Problems with the PPR tube mold core cooling system can also cause similar problems.

So what should I do if the ppr pipe leaks water?

First of all, we need to find the cause of the water leakage. Only when there is a reason can we know how to solve it. Here are a few solutions;

1. The safest solution is to replace the fittings and pipes at the leaking location. Close the main valve, drain the water, use ppr cutter to cut off the pipeline at the leaking part, use a ppr welding machine, and add a section directly. The process is not complicated, and someone has experience can solve it in 30 minutes.

2. If the PPR pipe is damaged in the ordinary wall, the pipe must be taken out and the bad pipe removed to replace the bad pipe.

3. You can choose IFANPLUS PPR pipe and pipe fittings. IFANPLUS product has better quality it can avoid leakage.